

0 x rated
Link tip:
Bosch reserves the right to revoke the consent for linking and/or embedding contents of the Bosch website to external sites in individual cases or in general. Linking or embedding Bosch contents on sites with dubious contents is prohibited.
Close window
Give rusty metal fences and gates a new shine: This can be done quickly and thoroughly with the delta sander from Bosch.
If you want to give metal fences and gates a new shine, you will need an indispensable assistant: the delta sander from Bosch.
Clean the fence or gate and remove loose rust using a wire brush. Stubborn rust can be removed using your delta sander.
Now sand down the old paint. If you cannot get into every corner with the triangular sanding plate on the delta sander, replace it with the flat sanding finger.
The oval sanding finger is ideal for the inner surfaces of circular ornamentation. Otherwise, work with "White Paint" sanding sheets (first with grit of 40, then with grit of 60).
After sanding, first paint your metal fence or gate with anti-corrosive paint. The finishing coat is then applied.
Close window
Dear Mr. Postmus,
Thank you very much for your interest in our products. At the moment, the PDA is not available in Australia. But you can have a look at the GDA http://www.bosch-pt.com.au/boptocs2-au/Product.jsp?country=AU&lang=en&division=gw&ccat_id=101285&object_id=5838
You can find the accessory which is used in the hints & tips here: http://www.bosch-pt.com.au/accboptocs2-au/Category.jsp;jsessionid=1E86675C63CAF7E99200ADCEA9808210.worker1?ccat_id=97454&lang=en
Please ask in the local stores for the tool and the corresponding prices.
We wish you great fun and success with refurbishing your balustrade!
Sounds just what I need for my rusty balustrade. How much are they and who stocks them in Perth WA
The data entrusted to Bosch shall be stored and processed electronically in accordance with legal stipulations and only used for the comment function on the Bosch Power Tool website.
Any further use of the data shall only take place when you explicitly declare that you agree to be notified about more information and current offers. In this case, you declare that you agree to your data being used for information and support purposes by Bosch. This consent can be revoked at any time for the future.
To do this, please get in touch with our central contact office using the contact link at the top of the page.
If you have any questions regarding data protection, please contact our data security engineer. Contact information can be found in the imprint.
Comments at Bosch are accessible to the public. We collect and store the following personal data:
- e-mail address
- First name, Surname
- Your comment
The data is not passed on to third parties. You can inquire at any time about the data stored about you, and have it changed and/or deleted.
To do this, please get in touch with our central contact office using the contact link at the top of the page.
If the contents of comments are libel, discriminating or violate the rights of third parties, you can report these comments directly to Bosch using the "Report violation" link.
Bosch will investigate all reported comments and does not accept liability for entries by third parties.
In order to prevent misuse of this service, Bosch shall store for a brief time the identification data (IP address) of every user who writes a comment.
Bosch reserves the right to delete contents without stating a reason.
If third parties show credibly that their rights have been violated by an entry made as part of this service, Bosch shall release the identification data for legal prosecution.
Thank you very much for the comment. To post it, please check your mails and confirm the link we have sent to you.
Thank you very much for the notification. We will attend to your notification immediately.
Der betroffene Kommentar wird in Kürze automatisch gelöscht werden.
Your comment will shortly be posted on this page.