DIY
- Homepage
- DIY Knowledge
- Hints & Tips
- Encyclopaedia
- Products
- Tools
- Accessories
- Garden Tools
- Service
- Spare Parts Service
- Operating Manuals
- News & Extras
- Current News
- Downloads
- Register your product - $10,000 Prize Draw
Tips & tricks
 |
 |
 |
 |
|---|
|
A guide to drill bits – the right drill bit for any occasionYou have to choose different drill bits and drilling methods depending on the material you want to work on. Here you will find out what each drill bit is suitable for. |
Basic knowledge |
***** 0 × commented |
|
A quick guide to fixingsThe range of fixings is nearly as big as the range of nails. We will give you an overview. |
Basic knowledge |
**** 0 × commented |
|
A quick guide to screwsIf you stand in front of the screw shelf at a DIY store, you will find a vast range of screws for every purpose. The various purposes can usually be assigned to the screws simply by the shape of the screw head. |
Basic knowledge |
**** 2 × commented |
|
Drilling large holesLarger holes are often required when installing switches or laying pipes. For this reason, special drill bit shapes and special material are necessary. |
Basic knowledge |
***** 0 × commented |
|
Drilling without dustIn this way, you can prevent drilling dust from spreading all over the entire room with simple means. |
Basic knowledge |
**** 1 × commented |
|
Fitting a sinkThe range of sinks is enormous. However, once you have chosen one, the rest is no problem at all. |
Advanced users |
**** 4 × commented |
|
Fitting a washbasinYou don't have to be a plumber to fit a new washbasin. You can do it on your own in just a few steps. |
Advanced users |
** 0 × commented |
|
Fitting cabinetsWall cabinets often carry a very large weight. Here we will show you how to fit them to the wall safely and firmly. |
Beginners |
*** 0 × commented |
|
Fitting folding doorsEspecially in small homes it is important to make maximum use of every space. Folding doors are particularly space-saving – and easy to install. |
Advanced users |
*** 0 × commented |
|
Fitting light fixtures to the ceilingProvide any room with atmospheric lighting – with new ceiling light fixtures. |
Beginners |
** 2 × commented |
|
Fitting tensioning cord systems for curtains and light fixturesTensioning cord systems are ideal for fitting curtains and light fixtures. To ensure that the tensioning system sits firm and secure, there are a few things you should observe. |
Beginners |
**** 0 × commented |
|
Floor coveringsSelecting a floor covering is often not only a question of money, it depends where the floor is to be laid. We will tell you which coverings are best suited. |
Basic knowledge |
**** 0 × commented |
|
Laying laminate and parquetLaying wooden and laminate floors is easier than you think. You just have to pay attention to a few things. |
Advanced users |
*** 2 × commented |
|
Old furniture in new splendourSpruce up old furniture – and create a stylish atmosphere! |
Advanced users |
*** 0 × commented |
|
Remembering work safetyAlthough DIY is fun, it also poses risks. But thankfully they can be minimised. |
Basic knowledge |
*** 0 × commented |
|
Removing scratches from wooden floors, wooden tables and chairsMake unsightly wooden surfaces look good again: Scratches and signs of wear and tear can be removed effortlessly with a few tricks. |
Beginners |
***** 0 × commented |
|
Renovating a facadeIn the long term, cracks in facade rendering often lead to considerable damage in the building fabric. Therefore, even small cracks should be repaired quickly. We will tell you how. |
Advanced users |
*** 0 × commented |
|
Replacing cracked floor tilesA little tip in advance: Get yourself a small supply of spare tiles when you purchase the tiles (especially when they are on special offer) because exactly the same tile is not always available later at retail outlets. |
Advanced users |
**** 4 × commented |
|
Restoring tables and chairsRescue old tables and chairs from the rubbish tip – with your delta sander! |
Beginners |
*** 0 × commented |
|
Sanding and repainting metal fences and gatesGive rusty metal fences and gates a new shine: This can be done quickly and thoroughly with the delta sander from Bosch. |
Advanced users |
*** 2 × commented |
|
Sanding down wooden floorsGiven the right treatment, old wooden floors and worn-down parquet can be made to shine like new. |
Advanced users |
** 2 × commented |
|
Sanding down wooden windowsWooden windows need a new coat of paint after a few cold winters. Here, we will show you how to keep them in shape for the next few years. |
Beginners |
** 0 × commented |
|
Stripping and repainting doorsHave you got an old door with cracked varnish? Give it a makeover! |
*** 1 × commented |
|
|
The basics of material scienceDifferent materials, such as wood, metal and plastic, have different properties. We will explain these and tell you what you should know when working on them. |
Basic knowledge |
*** 0 × commented |
|
The basics of wood jointsEven solidly built utility furniture seldom lasts for a lifetime because it is constantly being used. Any repair work on wooden furniture begins with the stabilising of joints, frames and stands. |
Basic knowledge |
**** 0 × commented |
|
The most important building material groups at a glanceThe generic term "building materials" refers to numerous substances that are divided into various groups on the basis of their chemical structure. |
Basic knowledge |
*** 0 × commented |
|
The right DIY equipmentYou should have at least the most important tools at home to do small repairs. We will tell you which tools make a basic collection. |
Basic knowledge |
***** 0 × commented |
|
The right power toolYou do not have to go out and buy a large amount of machinery for small repair jobs. We will tell you which power tools are suitable for household use. |
Basic knowledge |
**** 0 × commented |
|
The right way to chiselExpert DIY enthusiasts also have a few tricks up their sleeve for simple work like chiselling. We will tell you which are which. |
Basic knowledge |
*** 0 × commented |
|
The right way to drillDrilling is one of the most common jobs that need doing around the house. We will show you how to avoid drilling holes that are slanted or too big. |
Advanced users |
***** 0 × commented |
|
The right way to drive screwsScrewdrivers are indispensable tools. We will explain what you need to know about them. |
Basic knowledge |
**** 2 × commented |
|
The right way to measureThere are special measuring tools and instruments for each range. We will tell you which are which. |
Basic knowledge |
*** 0 × commented |
|
The right way to polishTurn your random orbit sander into a polishing tool – and make dull surfaces shine again! |
Basic knowledge |
**** 0 × commented |
|
The right way to sandSanding is part of the preparation required for virtually every type of surface treatment work. Find out which is the right sander for which application. |
Basic knowledge |
*** 0 × commented |
|
The right way to sawIt is especially important to take care when sawing. We will tell you what you should pay attention to. |
Basic knowledge |
** 3 × commented |
|
The right way to wallpaperWhen two people fit wallpaper, it is easier than you think. And ingrain wallpaper or fleece wallpaper are forgiving of slight inaccuracies. |
Beginners |
***** 0 × commented |
|
Tips on purchasing toolsTo ensure that you enjoy DIY for as long as possible, there are a few things you should note when purchasing a tool. |
Basic knowledge |
*** 0 × commented |
|
Tongue and groove systemsWhether parquet, laminate, tiles or wood beam ceilings – tongue and groove joints can be found in many areas. We will explain the advantages to you. |
Basic knowledge |
***** 1 × commented |
|
Whipping an old chest of drawers into shapeTurn an old chest of drawers into a wonderful showpiece! |
Advanced users |
*** 0 × commented |
Rate tip
1 x rated
Bookmarks
Blog tip
Link tip:
Legal note
Bosch reserves the right to revoke the consent for linking and/or embedding contents of the Bosch website to external sites in individual cases or in general. Linking or embedding Bosch contents on sites with dubious contents is prohibited.
Close window
Tongue and groove systems
Whether parquet, laminate, tiles or wood beam ceilings – tongue and groove joints can be found in many areas. We will explain the advantages to you.
Instructions
The tongue and groove joint is a plug-in connection of several components. The principle: A groove is cut into a component, which a tongue with the matching shape fits into. The tongue can be a loose, separate connecting piece or part of a second component that is to be connected. Fitting a tongue and groove joint prevents two adjacent boards from shifting position and achieves a flat surface.
As a mere plug-in system, the tongue and groove joint has the advantage that edges cannot be damaged when they are put together. The enlarged surface also allows for more glue to be applied, so that the joint holds better.
Tongue and groove joints can be found in virtually all areas: What are known as click floors for parquet and laminate, as well as tiles, roller shutter boxes, wood beam ceilings and canvas blinds can be joined using this technique.
Report violation
Close window
1 × Comments
Mick Voysey on 2010/06/12
Hi, I have cathedral ceiling within the main living areas and kitchen and it is not able to be insulated due to the ceiling being close to the roof. There is large beams approx 800mm apart structured on the ceiling with tongue and groove wood against the roof which I am going to place insulation between and create a tongue & groove wooden seal between the beams and the ceiling. I need to know what is available to create this depth between each beam allowing the insulation to sit between each beam with the new tongue and groove wood sealing the insulation between the beams. Your help is appreciated. Cheers Mick
Legal conditions
Data protection
The data entrusted to Bosch shall be stored and processed electronically in accordance with legal stipulations and only used for the comment function on the Bosch Power Tool website.
Any further use of the data shall only take place when you explicitly declare that you agree to be notified about more information and current offers. In this case, you declare that you agree to your data being used for information and support purposes by Bosch. This consent can be revoked at any time for the future.
To do this, please get in touch with our central contact office using the contact link at the top of the page.
If you have any questions regarding data protection, please contact our data security engineer. Contact information can be found in the imprint.
Data collection
Comments at Bosch are accessible to the public. We collect and store the following personal data:
- e-mail address
- First name, Surname
- Your comment
The data is not passed on to third parties. You can inquire at any time about the data stored about you, and have it changed and/or deleted.
To do this, please get in touch with our central contact office using the contact link at the top of the page.
If the contents of comments are libel, discriminating or violate the rights of third parties, you can report these comments directly to Bosch using the "Report violation" link.
Bosch will investigate all reported comments and does not accept liability for entries by third parties.
Misuse
In order to prevent misuse of this service, Bosch shall store for a brief time the identification data (IP address) of every user who writes a comment.
Bosch reserves the right to delete contents without stating a reason.
If third parties show credibly that their rights have been violated by an entry made as part of this service, Bosch shall release the identification data for legal prosecution.
Comment sent
Thank you very much for the comment. To post it, please check your mails and confirm the link we have sent to you.
Violation reported
Thank you very much for the notification. We will attend to your notification immediately.
Kommentar gelöscht
Der betroffene Kommentar wird in Kürze automatisch gelöscht werden.
Comment posted
Your comment will shortly be posted on this page.